The Cape Town office has moved to 11 Mobile road, Airport Industria, Cape Town.
We are in office #1 Xtraspace complex.
The Cape Town office is available for distribution/collection/on site support.
For sales and technical support please call 021 0125237 before visiting the office as there may not be anyone available to assist you.
Thank you for your interest in our quality products.
Piston or plunger dosing pumps by Seko are available in this PS 2 series. Capable of being set to provide between 40 to 1000 litre per hour at 20 bar, this TEFC motor unit comes with a selection of electric motors 0.25 to 0.75 kW in 3 phase and 0.37 to 1.1 kW in single phase, 220 volt.
Fluid heads in 316 stainless steel capable of up to 90 degree C and PVC liquid ends capable of temperatures to 40 degree C.
Please call GM Pumps CC for more information or assistance +27 777 1629 or mobile 082 651 9841.
Seko Tekno Evo AKS range is the very basic model in this analogue solenoid chemical dosing pump range. The unit allows the operator to set the dosing rate which is continuous if set on the pump program interface alone. One is able to choose a full 0 to 100% range or the reduced 0 to 20% range. The unit can be coupled to a Seko controller for a more accurate and controlled proportional dosing system.
The PDF below provides all the technical data relating to the Seko Tekno Evo AKS range.
Please call 082 651 9841 for more assistance or email sales@gmpumpsa.com
Seko developed the APG range to be the economic model of a versatile range of metering equipment. This range of chemical dosing pumps is designed for constant and proportional dosing being capable of receiving pulse and 4 to 20 mA signal from pH or redox probes, controllers and flow meters. The very cost effective pricing makes this range a serious contender in the water treatment, steam and process markets.
The PDF below will provide full technical data including dimension and performance detail.
Please call +27 82 651 9841 for more information or email sales@gmpumpsa.com
The Seko Tecno Evo AKL dosing or metering pump range is the next step up from the base AKS models. This range has the added feature of being able to receive a level control cable which turns the pump off prior to the unit drawing in air. The effect is that the unit does not loose prime between chemical tank changes saving the operator valuable time.
While all the technical data is available on the attached PDF file below, please call +27 826519841 or email sales@gmpumpsa.com for more information or assistance.